dmesg - 2011-03-23 09:52
Linux version 2.6.18-194.26.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Tue Nov 9 12:54:20 EST 2010
Command line: ro root=/dev/VolGroup00/LogVol00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cf679000 (usable)
BIOS-e820: 00000000cf679000 - 00000000cf68f000 (reserved)
BIOS-e820: 00000000cf68f000 - 00000000cf6ce000 (ACPI data)
BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
DMI 2.6 present.
ACPI: RSDP (v002 DELL ) @ 0x00000000000f0cd0
ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f0dd4
ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3f9c
ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3478
ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b35d8
ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b362c
ACPI: DMAR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3668
ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b38c4
ACPI: WD__ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3904
ACPI: SLIC (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3a3c
ACPI: ERST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf692edc
ACPI: HEST (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf69314c
ACPI: BERT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf692d5c
ACPI: EINJ (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf692d8c
ACPI: SRAT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3bc0
ACPI: TCPA (v002 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000cf6b3f34
ACPI: SSDT (v001 INTEL PPM RCM 0x80000001 INTL 0x20061109) @ 0x00000000cf6b7000
ACPI: DSDT (v001 DELL PE_SC3 0x00000001 INTL 0x20050624) @ 0x0000000000000000
SRAT: PXM 1 -> APIC 32 -> Node 0
SRAT: PXM 2 -> APIC 0 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 0
SRAT: PXM 2 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 50 -> Node 0
SRAT: PXM 2 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 52 -> Node 0
SRAT: PXM 2 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 0
SRAT: PXM 2 -> APIC 1 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 0
SRAT: PXM 2 -> APIC 3 -> Node 1
SRAT: PXM 1 -> APIC 51 -> Node 0
SRAT: PXM 2 -> APIC 19 -> Node 1
SRAT: PXM 1 -> APIC 53 -> Node 0
SRAT: PXM 2 -> APIC 21 -> Node 1
SRAT: Node 1 PXM 2 0-d0000000
SRAT: Node 1 PXM 2 0-230000000
SRAT: Node 0 PXM 1 230000000-430000000
NUMA: Using 28 for the hash shift.
Bootmem setup node 0 0000000230000000-0000000430000000
Bootmem setup node 1 0000000000000000-0000000230000000
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 2068480
Normal zone: 2068480 pages, LIFO batch:31
On node 1 totalpages: 2061928
DMA zone: 2615 pages, LIFO batch:0
DMA32 zone: 831153 pages, LIFO batch:31
Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
Processor #32 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
Processor #0 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
Processor #34 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
Processor #2 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x32] enabled)
Processor #50 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
Processor #18 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x34] enabled)
Processor #52 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x14] enabled)
Processor #20 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x21] enabled)
Processor #33 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
Processor #1 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x23] enabled)
Processor #35 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
Processor #3 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x33] enabled)
Processor #51 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
Processor #19 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x35] enabled)
Processor #53 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x15] enabled)
Processor #21 6:12 APIC version 21
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to clustered
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 00000000000a0000 - 0000000000100000
Nosave address range: 00000000cf679000 - 00000000cf68f000
Nosave address range: 00000000cf68f000 - 00000000cf6ce000
Nosave address range: 00000000cf6ce000 - 00000000d0000000
Nosave address range: 00000000d0000000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000fe000000
Nosave address range: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
SMP: Allowing 32 CPUs, 16 hotplug CPUs
Built 2 zonelists. Total pages: 4130408
Kernel command line: ro root=/dev/VolGroup00/LogVol00
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x28a0000 - 0x68a0000
Memory: 16426072k/17563648k available (2575k kernel code, 340940k reserved, 1304k data, 212k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.13 BogoMIPS (lpj=2394067)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 0/20 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 8.312 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/16 APIC 0x0
Initializing CPU#1
Calibrating delay using timer specific routine.. 4788.04 BogoMIPS (lpj=2394023)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 1/0 -> Node 1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 2/16 APIC 0x22
Initializing CPU#2
Calibrating delay using timer specific routine.. 4787.96 BogoMIPS (lpj=2393982)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 2/22 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 3/16 APIC 0x2
Initializing CPU#3
Calibrating delay using timer specific routine.. 4788.01 BogoMIPS (lpj=2394009)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 3/2 -> Node 1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 4/16 APIC 0x32
Initializing CPU#4
Calibrating delay using timer specific routine.. 4788.02 BogoMIPS (lpj=2394014)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 4/32 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 9
CPU4: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 5/16 APIC 0x12
Initializing CPU#5
Calibrating delay using timer specific routine.. 4788.08 BogoMIPS (lpj=2394043)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 5/12 -> Node 1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
CPU5: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 6/16 APIC 0x34
Initializing CPU#6
Calibrating delay using timer specific routine.. 4788.03 BogoMIPS (lpj=2394018)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 6/34 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 10
CPU6: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 7/16 APIC 0x14
Initializing CPU#7
Calibrating delay using timer specific routine.. 4788.05 BogoMIPS (lpj=2394027)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 7/14 -> Node 1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 10
CPU7: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 8/16 APIC 0x21
Initializing CPU#8
Calibrating delay using timer specific routine.. 4788.03 BogoMIPS (lpj=2394015)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 8/21 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU8: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 9/16 APIC 0x1
Initializing CPU#9
Calibrating delay using timer specific routine.. 4788.02 BogoMIPS (lpj=2394012)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 9/1 -> Node 1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU9: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 10/16 APIC 0x23
Initializing CPU#10
Calibrating delay using timer specific routine.. 4788.03 BogoMIPS (lpj=2394017)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 10/23 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU10: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 11/16 APIC 0x3
Initializing CPU#11
Calibrating delay using timer specific routine.. 4788.04 BogoMIPS (lpj=2394020)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 11/3 -> Node 1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU11: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 12/16 APIC 0x33
Initializing CPU#12
Calibrating delay using timer specific routine.. 4788.02 BogoMIPS (lpj=2394014)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 12/33 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 9
CPU12: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 13/16 APIC 0x13
Initializing CPU#13
Calibrating delay using timer specific routine.. 4788.01 BogoMIPS (lpj=2394006)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 13/13 -> Node 1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
CPU13: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 14/16 APIC 0x35
Initializing CPU#14
Calibrating delay using timer specific routine.. 4788.05 BogoMIPS (lpj=2394027)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 14/35 -> Node 0
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 10
CPU14: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 15/16 APIC 0x15
Initializing CPU#15
Calibrating delay using timer specific routine.. 4788.05 BogoMIPS (lpj=2394029)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 15/15 -> Node 1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 10
CPU15: Thermal monitoring enabled (TM1)
Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
Brought up 16 CPUs
testing NMI watchdog ... OK.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2394.067 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=3,20,1588
checking if image is initramfs... it is
Freeing initrd memory: 3408k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
DMAR:Host address width 40
DMAR:DRHD base: 0x000000fed90000 flags: 0x1
IOMMU fed90000: ver 1:0 cap c90780106f0462 ecap f020f6
DMAR:RMRR base: 0x000000cf7c8000 end: 0x000000cf7dffff
DMAR:RMRR base: 0x000000cf7b1000 end: 0x000000cf7bffff
DMAR:RMRR base: 0x000000cf7a1000 end: 0x000000cf7a1fff
DMAR:RMRR base: 0x000000cf7a3000 end: 0x000000cf7a3fff
DMAR:RMRR base: 0x000000cf7a5000 end: 0x000000cf7a5fff
DMAR:RMRR base: 0x000000cf7a7000 end: 0x000000cf7a7fff
DMAR:RMRR base: 0x000000cf7c0000 end: 0x000000cf7c0fff
DMAR:RMRR base: 0x000000cf7c2000 end: 0x000000cf7c2fff
DMAR:ATSR flags: 0x0
DMAR:Device scope device [0000:00:1a.02] not found
DMAR:Device scope device [0000:00:1a.02] not found
DMAR:Device scope device [0000:00:1d.02] not found
DMAR:Device scope device [0000:00:1d.02] not found
PCI-GART: No AMD northbridge found.
pnp: 00:07: ioport range 0x800-0x87f could not be reserved
pnp: 00:07: ioport range 0x880-0x8ff has been reserved
pnp: 00:07: ioport range 0x900-0x91f has been reserved
pnp: 00:07: ioport range 0x920-0x923 has been reserved
pnp: 00:07: ioport range 0x924-0x924 has been reserved
pnp: 00:07: ioport range 0xc00-0xc7f has been reserved
pnp: 00:07: ioport range 0xca0-0xca7 has been reserved
pnp: 00:08: ioport range 0xca8-0xca8 has been reserved
pnp: 00:08: ioport range 0xcac-0xcac has been reserved
pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:0c: iomem range 0xfed90000-0xfed91fff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: d6000000-d9ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: da000000-ddffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: f000-ffff
MEM window: df100000-df2fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: de000000-deffffff
PREFETCH window 0x00000000d5800000-0x00000000d5ffffff
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 53 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 53 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:03.0 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 53 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 53 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:09.0 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1300122234.392:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 12AFE3EA6A14161C
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:06:03.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C2[C3])
ACPI: CPU1 (power states: C1[C1] C2[C3])
ACPI: CPU2 (power states: C1[C1] C2[C3])
ACPI: CPU3 (power states: C1[C1] C2[C3])
ACPI: CPU4 (power states: C1[C1] C2[C3])
ACPI: CPU5 (power states: C1[C1] C2[C3])
ACPI: CPU6 (power states: C1[C1] C2[C3])
ACPI: CPU7 (power states: C1[C1] C2[C3])
ACPI: CPU8 (power states: C1[C1] C2[C3])
ACPI: CPU9 (power states: C1[C1] C2[C3])
ACPI: CPU10 (power states: C1[C1] C2[C3])
ACPI: CPU11 (power states: C1[C1] C2[C3])
ACPI: CPU12 (power states: C1[C1] C2[C3])
ACPI: CPU13 (power states: C1[C1] C2[C3])
ACPI: CPU14 (power states: C1[C1] C2[C3])
ACPI: CPU15 (power states: C1[C1] C2[C3])
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 212k freed
Write protecting the kernel read-only data: 504k
GSI 18 sharing vector 0xE9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 233, io mem 0xdf0ff800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
GSI 19 sharing vector 0x32 and IRQ 19
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 50, io mem 0xdf0ffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
GSI 20 sharing vector 0x3A and IRQ 20
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 17 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 58, io base 0x0000ec40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
GSI 21 sharing vector 0x42 and IRQ 21
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 18 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 66, io base 0x0000ec60
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 50, io base 0x0000ec80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
GSI 22 sharing vector 0x4A and IRQ 22
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 74, io base 0x0000eca0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
SCSI subsystem initialized
mpt2sas version 01.101.06.00 loaded
scsi0 : Fusion MPT SAS Host
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:03:00.0 to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (16429696 kB)
mpt2sas0: PCI-MSI-X enabled: IRQ 82
mpt2sas0: iomem(0xdf2b0000), mapped(0xffffc20000060000), size(65536)
mpt2sas0: ioport(0xfc00), size(256)
mpt2sas0: sending diag reset !!
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
input: Avocent USB Composite Device-0 as /class/input/input0
input: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2
input: Avocent USB Composite Device-0 as /class/input/input1
input: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2
mpt2sas0: diag reset: SUCCESS
mpt2sas0: Allocated physical memory: size(1125 kB)
mpt2sas0: Current Controller Queue Depth(490), Max Controller Queue Depth(3439)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2008: FWVersion(02.15.59.00), ChipRevision(0x02), BiosVersion(07.01.08.00)
mpt2sas0: Dell PERC H200 Integrated: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1E)
mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x50026b905efef200), phys(8)
mpt2sas0: port enable: SUCCESS
Vendor: SEAGATE Model: ST9146803SS Rev: FS62
Type: Direct-Access ANSI SCSI revision: 05
scsi 0:0:0:0: SSP: handle(0x000a), sas_addr(0x5000c50023138665), device_name(0x00c5005064861323)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x50026b905efef200), slot(0)
scsi 0:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
SCSI device sda: 286749480 512-byte hdwr sectors (146816 MB)
sda: Write Protect is off
sda: Mode Sense: bb 00 10 08
SCSI device sda: drive cache: write through w/ FUA
SCSI device sda: 286749480 512-byte hdwr sectors (146816 MB)
sda: Write Protect is off
sda: Mode Sense: bb 00 10 08
SCSI device sda: drive cache: write through w/ FUA
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
GSI 23 sharing vector 0x5A and IRQ 23
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 90
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 90
ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 90
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 4 SControl 0)
Vendor: TEAC Model: DVD-ROM DV-28SW Rev: R.2A
Type: CD-ROM ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1300122266.635:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input2
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
GSI 24 sharing vector 0x62 and IRQ 24
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 36 (level, low) -> IRQ 98
PCI: Setting latency timer of device 0000:01:00.0 to 64
eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 98, node addr 0022196d07b3
GSI 25 sharing vector 0x6A and IRQ 25
ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 48 (level, low) -> IRQ 106
PCI: Setting latency timer of device 0000:01:00.1 to 64
eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 106, node addr 0022196d07b5
GSI 26 sharing vector 0x72 and IRQ 26
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 32 (level, low) -> IRQ 114
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 114, node addr 0022196d07b7
GSI 27 sharing vector 0x7A and IRQ 27
ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 42 (level, low) -> IRQ 122
PCI: Setting latency timer of device 0000:02:00.1 to 64
eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 122, node addr 0022196d07b9
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
ACPI Exception (evregion-0424): AE_SUPPORT, Returned by Handler for [DataTable] [20060707]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff81023003d8b0), AE_SUPPORT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff81023003d8f0), AE_SUPPORT
ACPI Exception (power_meter-0759): AE_SUPPORT, Evaluating _PMC [20060707]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 18481144k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:18481144k
IA-32 Microcode Update Driver: v1.14a
bnx2: eth0: using MSIX
bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
eth0: no IPv6 routers present
sd 0:0:0:0: Queue depth reduced to (121)